Up ] Dimensions ]

Individual R250 Series Model Descriptions

R250 Series Reciprocating Embossers

R250 Embossers utilize sharpface, hardened steel type for embossing chipboard boxes and soft metals. Model R251AD is used for a 1" x 1" imprinting area with up to two lines of code, while the R252AD is used for a larger 1" x 2" area, again with up to two lines of code. The units can be placed on-line or used in conjunction with the bench stand option for off-line coding applications.

Click for larger image
R250 Series Reciprocating Embossers

R250 Series Models

The R250 Series of reciprocating imprinters are available in a configuration to suit the printing application. Print areas are available from 1/2" x 1" with one line of code to a maximum print area of 2" x 4" for multi-level applications. Pictured below are a few of the available possibilities. Immediately on the right is the R251 imprinter with a 1" x 1" interlocking print plate adapter.

Click for larger image
R251 Series 1x1 inch imprint area
Click for larger image

R252 Series 1x2 inch imprint area
Click for larger image

R252-2 Series
2x2 inch imprint area
Click for larger image

R254 Series 1x4 inch imprint area
Click for larger image

R254-2 Series 2x4 inch imprint area

R250 Series Benchstand

Off-line precision coding can be achieved with the use of the R250 benchstand option. This stand can be used with any R250 Series imprinter or embosser and is highly effective in semi-automatic operations.
When used with the optional footswitch or standard microswitch, this versatile workstation can fill many low volume production needs.
Click for larger image

R250 Series Benchstand
Top

RETURN TO OMNIPRINT HOME PAGE

 

67 Sand Park Road
Cedar Grove, NJ 07009 USA
Phone: (800) 469-2205
             (973) 857-0901
Fax:      (973) 857-0607
Please send your comments about this site to [email protected]
This page was updated on 27-Sep-99
Copyright 1999, 2000