- CLICK ON THE
ICON ON YOUR BROWSER TO HAVE A COPY
- MATERIAL SAFETY DATA SHEET
- MSDS No: 642
- SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
- PRODUCT NAME: 3852 CLEANER
- PRODUCT USE: Ink Jet Printing
- DATE PREPARED: 04/13/98
- SUPPLIER NAME AND ADDRESS: digital design inc.
- 67 Sand Park Road
- Cedar Grove, NJ 07009
- SUPPLIER PHONE: (973) 857-9500
-
- EMERGENCY PHONE - 24 HOURS: CALL CHEM-TEL, INC.
(800) 255-3924
SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS
| COMPONENT |
WT. % |
OSHA PEL |
ACGIH TLV |
CAS REGISTRY# |
- NONE
|
|
|
|
|
- SECTION 3 HAZARDS IDENTIFICATION
- EMERGENCY OVERVIEW: COLOR: Clear/milky
- APPEARANCE: Mobile Liquid
- ODOR: None
- HAZARD SUMMARY: Non-Flammable Liquid
- Irritating to eyes and respiratory system
- Harmful if swallowed
- Absorbed through skin
- Vapors are heavier than air
-
- POTENTIAL HEALTH EFFECTS
- INHALATION: Aerosol may cause irritation, but unlikely
-
- EYE CONTACT: Mild irritant
-
- SKIN CONTACT: Irritation is unlikely
-
- INGESTION: Harmful if swallowed. Can cause irritation of the
gastrointestinal tract leading to diarrhea, nausea, vomiting.
- CHRONIC: None known
-
-
- NFPA RATING: HEALTH: 0
FLAMMABILITY: 0 REACTIVITY: 0
-
-
-
-
-
-
- SECTION 4 FIRST AID MEASURES
-
-
- INHALATION: Move the exposed person to fresh air at once.
Perform artificial respiration if breathing has stopped. Keep the affected person warm and
at rest. Get immediate medical attention.
- EYE CONTACT: Hold eyelids apart and flush with plenty of water
for at least 15 minutes. Get immediate medical attention.
- SKIN CONTACT: Promptly wash contaminated skins with soap or
mild detergent and water. Remove clothing if soaked and wash as above. Get medical
attention if irritation develops or persists.
- INGESTION: NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK
FLUID! Promptly let affected person drink lots of water to dilute the swallowed chemical.
DO NOT induce vomiting. Get immediate medical attention.
-
- SECTION 5 FIRE FIGHTING MEASURES
- FLASHPOINT AND METHOD: 355 deg. F Tag Closed Cup
-
- FLAMMABLE LIMITS: LEL: N/A UEL:
N/A
-
- GENERAL HAZARD: None known
- FIRE FIGHTING
- INSTRUCTIONS: Keep run-off water out of sewers and
watercourses. Dikes for water control. If water pollution occurs notify appropriate
authorities. Use water SPRAY only to cool containers! Do not put water on leaked material.
Move container from fire area if it can be done without risk. As in any fire, wear
self-contained breathing apparatus (pressure demand, MSHA/NIOSH approved or equivalent)
and full protective gear.
- FIRE FIGHTING
- EQUIPMENT: As in any fire, wear self-contained breathing
apparatus (pressure demand, MSHA/NIOSH approved or equivalent) and full protective gear.
"Alcohol foam", carbon dioxide, (CO2, dry chemicals, sand, water spray, fog or
mist).
-
- HAZARDOUS COMBUSTION
- PRODUCTS:
- SECTION 6 ACCIDENTAL RELEASE MEASURES
-
- LAND SPILL: Absorb with absorbents (sawdust or clay type).
-
-
-
- WATER SPILL: Confine spillage and absorb with dry,
non-combustible, absorbent materials and sweep up into suitable sealable container for
- disposal. Prevent the spillage from entering drains, as potential
explosion hazard will be created. If entry occurs inform local authorities,
- particularly the Fire Service.
- SECTION 7 HANDLING AND STORAGE
-
-
- STORAGE TEMPERATURE: Highest vapor levels occur typically
during printer cleaning operations. Avoid spilling, skin and eye contact. Avoid inhalation
of vapor and spray mist. Smoking, eating and drinking should be prohibited in areas of
storage and use. Containers of this product may be hazardous when emptied. Since emptied
containers retain product residues (vapors, liquids, solids), all hazard precautions
mentioned in this data sheet must be observed when handling emptied containers.
-
- STORAGE PRESSURE: Store in a cool, dry, well ventilated area,
away from incompatible materials (see section 10) and in tightly closed containers. Avoid
exposure to direct sunlight.
-
GENERAL: Store in a cool, dark, dry area.
SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION
ENGINEERING CONTROLS
VENTILATION: Provide adequate general and local exhaust ventilation
to maintain vapor concentrations well within the PEL/TLV's.
PERSONAL PROTECTION
RESPIRATOR: A respiratory protection program that meets OSHA's
29 CFR 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions
warrant a respirator's use.
- PROTECTIVE CLOTHING: The gloves listed may provide protection
against permeation. Rubber (natural, latex), polyvinyl acetate
- (PVA), P.T.F.E.
- SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
- VAPOR PRESSURE: VAPOR DENSITY: Heavier than air
- SPECIFIC GRAVITY: 1.02 at 68 deg. F PHYSICAL
STATE:
- SOLUBILITY IN WATER: Soluble in water EVAPORATION
RATE: 80
- pH: 6.5 - 7.5 BOILING POINT: Decomposes
at 1 atm FREEZING POINT: VISCOSITY: approx.
3.5cps
- ODOR: None APPEARANCE: Mobile
liquid
- SECTION 10 STABILITY AND REACTIVITY
- GENERAL: Normally stable. Avoid heat, sparks, flames, moisture
and light.
- INCOMPATIBLE MATERIALS
- AND CONDITIONS TO AVOID: Strong oxidizing agents. Amines.
Strong acids
- HAZARDOUS DECOMPOSITION: In a fire, hazardous
decomposition products such as smoke, carbon monoxide, carbon dioxide and oxides of
nitrogen, and possibly toxic hydrocarbons may be formed.
-
-
-
-
-
- SECTION 11 TOXICOLOGICAL INFORMATION
- There is no data available on the product itself. Exposure to organic
solvent vapors may result in adverse health effects such as irritation of the mucous
membrane and the respiratory system and adverse effects on the renal and central nervous
systems. Symptoms include headache, dizziness, fatigue, muscular weakness, drowsiness and
in extreme cases, loss of consciousness. Repeated or prolonged contact with the product
may lead to removal of natural fats from the skin resulting in non-allergenic contact
dermatitis and absorption through the skin. Splashes in the eyes may cause irritation and
reversible local damage.
-
- SECTION 12 ECOLOGICAL INFORMATION
- No Data Available
-
- SECTION 13 DISPOSAL CONSIDERATIONS
- DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL, STATE AND FEDERAL
REGULATIONS.
-
- SECTION 14 TRANSPORT INFORMATION
- DOT (Department Of Transportation)
- PROPER SHIPPING NAME: Aerosols, non-flammable
- UN/NA NUMBER: 1950
- HAZARD CLASS: 2.2
- PACKING GROUP: N/A
- EMERGENCY PHONE - 24 HOURS: CALL CHEM-TEL, INC.
(800) 255-3924
-
- SECTION 15 REGULATORY INFORMATION
- OSHA: Hazardous by definition of Hazard Communication Standard (29
CFR 1910.1200) TSCA: Components of this product are listed on the Toxic Substance Control
Act (TSCA) Inventory. SECTION 313: This product contains the following substances subject
to reporting requirements of Section 313 of Title III of the Superfund Amendment and
Reauthorization Act of 1986 and 40 CFR 372: INGREDIENT: N/A
- CAS No.: N/A
- %Wt.: N/A
- CONEG: No intentional addition of Lead, Cadmium, Mercury, or
Hexavalent Chromium has been made to this product. To the best knowledge, the total
incidental amount of the four metals listed above does not exceed 100 ppm.
-
- SECTION 16 OTHER INFORMATION
- SPECIFIC NOTES: None REPLACES ISSUE DATE: 06 June 1996 REVISION
SUMMARY: Format changed to reflect actual hazards REVISION DATE:13
April, 1998
- DISCLAIMER
- THIS INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL
DESIGNATED AND MAY NOT BE VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER
MATERIALS OR IN ANY PROCESS. SUCH INFORMATION IS, TO THE BEST OF DIGITAL DESIGNS
KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS OF THE DATE INDICATED. HOWEVER, NO
WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR
COMPLETENESS. IT IS THE USERS RESPONSIBILITY TO SATISFY HIMSELF AS TO THE
SUITABILITY OF SUCH INFORMATION FOR HIS OWN PARTICULAR USE.
|