- CLICK ON THE
ICON ON YOUR BROWSER TO HAVE A COPY
- MATERIAL SAFETY DATA SHEET
- MSDS No: 857
- SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
- PRODUCT NAME: 3428 WH, 5021 WH INK
- PRODUCT USE: Ink Jet Printing
- DATE PREPARED: 1/23/1998
- SUPPLIER NAME AND ADDRESS: digital design inc.
- 67 Sand Park Road
- Cedar Grove, NJ 07009
- SUPPLIER PHONE: (973) 857-9500
-
- EMERGENCY PHONE - 24 HOURS: CALL CHEM-TEL, INC.
(800) 255-3924
- SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS
| COMPONENT |
WT. % |
OSHA PEL |
ACGIH TLV |
CAS REGISTRY# |
- 2-ETHOXYETHYL ACETATE
|
- 25.00%
|
- 100 ppm
|
- 100 ppm
|
- 111-15-9
|
- METHYL CARBITOL
|
- <20%
|
- Not Established
|
- Not Established
|
- 111-77-3
|
- DIACETONE
|
- <15%
|
- 50 ppm
|
- 50 ppm
|
- 123-42-2
|
- 2-ETHOXYETHANOL
|
- <5%
|
- 200 ppm
|
- 200 ppm
|
- 110-80-5
|
- PHENYL GLYCOL ETHER
|
- <5%
|
- Not Established
|
- Not Established
|
- 122-99-6
|
- SECTION 3 HAZARDS IDENTIFICATION
- EMERGENCY OVERVIEW: COLOR: White
- APPEARANCE: Mobile Liquid
- ODOR: Characteristic Alcohol
- HAZARD SUMMARY: Flammable Liquid
- Irritating to eyes and respiratory system
- Harmful if swallowed
- Absorbed through skin
- Vapors are heavier than air
- Dried ink is highly flammable
- POTENTIAL HEALTH EFFECTS
- INHALATION: High vapor concentrations are irritating to the
eyes and the respiratory tract and may cause headache and dizziness. Can cause central
nervous depression and unconsciousness. Low order of toxicity.
- EYE CONTACT: Severely irritating. If not removed promptly,
will injure eye tissue, which may result in permanent damage. High vapor
- concentrations may cause irritation.
- SKIN CONTACT: Prolonged or repeated contact can result in
defatting and drying of the skin which may result in skin irritation and dermatitis. Low
order of toxicity.
- INGESTION: Harmful if swallowed. Can cause irritation of the
gastrointestinal tract and central nervous system depression, leading to diarrhea,
- nausea, vomiting, headache, drowsiness and unconsciousness. Small
amounts aspirated into the respiratory tract during swallowing or vomiting
- may cause severe and delayed
- CHRONIC: Chronic overexposure to components of this product
have been found to have the following effects on laboratory animals: Liver
- abnormalities, damage to the kidneys, lungs, brain, eyes, spleen and
central nervous system. Overexposure of humans to components of this product have been
suggested as the cause of following effects: kidney, eye damage, and liver abnormalities.
-
- NFPA RATING: HEALTH: 2 FLAMMABILITY: 2 REACTIVITY: 0
-
-
-
-
- SECTION 4 FIRST AID MEASURES
- INHALATION: Move the exposed person to fresh air at once.
Perform artificial respiration if breathing has stopped. Keep the affected person warm and
at rest. Get immediate medical attention.
- EYE CONTACT: Hold eyelids apart and flush with plenty of water
for at least 15 minutes. Get immediate medical attention.
- SKIN CONTACT: Promptly wash contaminated skins with soap or
mild detergent and water. Remove clothing if soaked and wash as above. Get medical
attention if irritation develops or persists.
- INGESTION: NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK
FLUID! Promptly let affected person drink lots of water to dilute the swallowed chemical.
DO NOT induce vomiting. Get immediate medical attention.
-
- SECTION 5 FIRE FIGHTING MEASURES
- FLASHPOINT AND METHOD: 120 deg. F Tag Closed Cup
- FLAMMABLE LIMITS: LEL:1.5%by weight@77 deg F (Ethanol) UEL: 14.0% by weight @ 77 deg F (Ethanol)
- GENERAL HAZARD: May explode when heated or when exposed to
flames or sparks. Solvent vapors may form explosive mixtures with air. Vapors may travel
considerable distance to source of ignition and flash back. In a fire, hazardous
decomposition products such as smoke, carbon monoxide, carbon dioxide and oxides of
nitrogen, and possibly toxic hydrocarbons may be formed.
- FIRE FIGHTING
- INSTRUCTIONS: Keep run-off water out of sewers and
watercourses. Dikes for water control. If water pollution occurs notify appropriate
authorities. Use water SPRAY only to cool containers! Do not put water on leaked material.
Move container from fire area if it can be done without risk. As in any fire, wear
self-contained breathing apparatus (pressure demand, MSHA/NIOSH approved or equivalent)
and full protective gear.
- FIRE FIGHTING
- EQUIPMENT: As in any fire, wear self-contained breathing
apparatus (pressure demand, MSHA/NIOSH approved or equivalent) and full protective gear.
"Alcohol foam", carbon dioxide, (CO2, dry chemicals, sand, water spray, fog or
mist).
- HAZARDOUS COMBUSTION
- PRODUCTS:
- SECTION 6 ACCIDENTAL RELEASE MEASURES
- LAND SPILL: Extinguish all sources of ignition. Avoid sparks,
flames, heat and smoking. Provide ventilation and confine spill. Do not allow run off to
drains. Clean-up personnel should use respiratory and/or liquid contact protection. Wash
thoroughly after dealing with spill.
-
- WATER SPILL: Absorb liquid on paper towel or other dry
material and transfer to an extractor hood. Let vapors evaporate. Dispose as flammable
waste. Confine spillage and absorb with dry, non-combustible, absorbent materials and
sweep up into suitable sealable container for disposal. Prevent the spillage from entering
drains, as potential explosion hazard will be created. If entry occurs inform local
authorities, particularly the Fire Service.
-
-
-
-
-
-
-
- SECTION 7 HANDLING AND STORAGE
- STORAGE TEMPERATURE: Vapors are heavier than air and may spread along
floors to form explosive mixtures with air. Ventilate well to prevent the creation of
flammable or explosive concentrations of vapor in air and to avoid vapor concentrations
higher than the permissible exposure limits. Highest vapor levels occur typically during
printer cleaning operations. Avoid spilling, skin and eye contact. Avoid inhalation of
vapor and spray mist. Smoking, eating and drinking should be prohibited in areas of
storage and use. Good housekeeping standards and regular safe removal of waste materials
will minimize risks of spontaneous combustion and other fire risks. As dried ink is highly
flammable, do not allow it to accumulate on, or around, the printer. Containers of this
product may be hazardous when emptied. Since emptied containers retain product residues
(vapors, liquids, and solids), all hazard precautions mentioned in this data sheet must be
observed when handling emptied containers.
-
- STORAGE PRESSURE: FLAMMABLE LIQUID! Store in a cool, dry, well
ventilated area, away from incompatible materials (see section 10) and in tightly closed
containers. Avoid exposure to direct sunlight, sources of ignition and a build up of
static electricity. The storage and use of highly flammable liquid is subject to
regulation; consult your company safety officer or your local authority for guidance.
- GENERAL: Flammable liquid storage
- SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION
- ENGINEERING CONTROLS
- VENTILATION: Provide adequate general and local exhaust ventilation
to maintain vapor concentrations well within the PEL/TLV=s.
- PERSONAL PROTECTION
- RESPIRATOR: A respiratory protection program that meets OSHA's 29 CFR
1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions
warrant a respirator's use.
- PROTECTIVE CLOTHING: The gloves listed below may provide
protection against permeation. Rubber (natural, latex), polyvinyl acetate (PVA), P.T.F.E.
- SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
- VAPOR PRESSURE: No data VAPOR DENSITY:
Heavier than air
- SPECIFIC GRAVITY: 0.8 at 68 deg. F PHYSICAL
STATE: No data
- SOLUBILITY IN WATER: Soluble in organic solvents (most),
insoluble in water EVAPORATION RATE: 60
- pH: No data BOILING POINT: 336 deg
F (Ethanol) FREEZING POINT: No data
VISCOSITY: appx. 10-15cps
- ODOR: Characteristic alcohol
APPEARANCE: Mobile liquid
- SECTION 10 STABILITY AND REACTIVITY
- GENERAL: Normally stable. Avoid heat, sparks, flames, moisture
and light.
- INCOMPATIBLE MATERIALS
- AND CONDITIONS TO AVOID: Strong oxidizing agents. Amines.
Strong acids
- HAZARDOUS DECOMPOSITION: In a fire, hazardous
decomposition products such as smoke, carbon monoxide, carbon dioxide and oxides of
nitrogen, and possibly toxic hydrocarbons may be formed.
-
-
-
-
-
- SECTION 11 TOXICOLOGICAL INFORMATION
- There is no data available on the product itself. Exposure to organic
solvent vapors may result in adverse health effects such as irritation of the mucous
membrane and the respiratory system and adverse effects on the renal and central nervous
systems. Symptoms include headache, dizziness, fatigue, muscular weakness, drowsiness and
in extreme cases, loss of consciousness. Repeated or prolonged contact with the product
may lead to removal of natural fats from the skin resulting in non-allergenic contact
dermatitis and absorption through the skin. Splashes in the eyes may cause irritation and
reversible local damage.
-
- SECTION 12 ECOLOGICAL INFORMATION
- No Data Available
-
-
-
-
- SECTION 13 DISPOSAL CONSIDERATIONS
- DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL, STATE AND FEDERAL
REGULATIONS.
-
- SECTION 14 TRANSPORT INFORMATION
- DOT (Department Of Transportation)
- PROPER SHIPPING NAME: Printing Ink, flammable
- UN/NA NUMBER: 1210
- HAZARD CLASS: 3
- PACKING GROUP: II
- EMERGENCY PHONE - 24 HOURS: CALL CHEM-TEL, INC.
(800) 255-3924
-
- SECTION 15 REGULATORY INFORMATION
- OSHA: Hazardous by definition of Hazard Communication Standard (29
CFR 1910.1200) TSCA: Components of this product are listed on the Toxic Substance Control
Act (TSCA) Inventory. SECTION 313: This product contains the following substances subject
to reporting requirements of Section 313 of Title III of the Superfund Amendment and
Reauthorization Act of 1986 and 40 CFR 372: INGREDIENT: 2-ETHOXYETHANOL
- CAS No.: 110-80-5
- %Wt.: <5
- CONEG: No intentional addition of Lead, Cadmium, Mercury, or
Hexavalent Chromium has been made to this product. To the best knowledge, the total
incidental amount of the four metals listed above does not exceed 100 ppm.
-
- SECTION 16 OTHER INFORMATION
- SPECIFIC NOTES: None REVISION DATE: 06 June 1996
- REPLACES ISSUE DATE: New Issue REVISION SUMMARY: Format changed to
ANSI Z400.1 standard
- DISCLAIMER
- THIS INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL
DESIGNATED AND MAY NOT BE VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER
MATERIALS OR IN ANY PROCESS. SUCH INFORMATION IS, TO THE BEST OF DIGITAL DESIGNS
KNOWLEDGE AND BELIEF; ACCURATE AND RELIABLE AS OF THE DATE INDICATED. HOWEVER, NO
WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR
COMPLETENESS. IT IS THE USERS RESPONSIBILITY TO SATISFY HIMSELF AS TO THE
SUITABILITY OF SUCH INFORMATION FOR HIS OWN PARTICULAR USE.
|