BACK TO INK CHART CLICK ON THE PRINT ICON ON YOUR BROWSER TO HAVE A COPY MATERIAL SAFETY DATA SHEET MSDS No: 801 SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: 3400 YW, 5032 YW INK PRODUCT USE: Ink Jet Printing DATE PREPARED: 1/23/1998 SUPPLIER NAME AND ADDRESS: digital design inc. 67 Sand Park Road Cedar Grove, NJ 07009 SUPPLIER PHONE: (973) 857-9500   EMERGENCY PHONE - 24 HOURS: CALL CHEM-TEL, INC. (800) 255-3924 SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS COMPONENT WT. % OSHA PEL ACGIH TLV CAS REGISTRY# DIACETONE ALCOHOL 60.00% 50 ppm 50 ppm 123-42-2 2-METHOXYETHANOL <15% 25 ppm (skin) 25 ppm (skin) 109-86-4 2-ETHOXYETHYL ACETATE <15% 100 ppm (skin) 100 ppm (skin) 111-15-9 SECTION 3 HAZARDS IDENTIFICATION EMERGENCY OVERVIEW: COLOR: Yellow APPEARANCE: Mobile Liquid ODOR: Characteristic Alcohol HAZARD SUMMARY: Flammable Liquid Irritating to eyes and respiratory system Harmful if swallowed Absorbed through skin Vapors are heavier than air Dried ink is highly flammable POTENTIAL HEALTH EFFECTS INHALATION: High vapor concentrations are irritating to the eyes and the respiratory tract and may cause headache and dizziness. Can cause central nervous depression and unconsciousness. Low order of toxicity. EYE CONTACT: Severely irritating. If not removed promptly, will injure eye tissue, which may result in permanent damage. High vapor concentrations may cause irritation. SKIN CONTACT: Prolonged or repeated contact can result in defatting and drying of the skin which may result in skin irritation and dermatitis. Low order of toxicity. INGESTION: Harmful if swallowed. Can cause irritation of the gastrointestinal tract and central nervous system depression, leading to diarrhea, nausea, vomiting, headache, drowsiness and unconsciousness. Small amounts aspirated into the respiratory tract during swallowing or vomiting may cause severe and delayed CHRONIC: Chronic overexposure to components of this product have been found to have the following effects on laboratory animals: Liver abnormalities, damage to the kidneys, lungs, brain, eyes, spleen and central nervous system. Overexposure of humans to components of this product have been suggested as the cause of following effects: kidney, eye damage, and liver abnormalities. NFPA RATING: HEALTH: 2 FLAMMABILITY: 2 REACTIVITY: 0         SECTION 4 FIRST AID MEASURES   INHALATION: Move the exposed person to fresh air at once. Perform artificial respiration if breathing has stopped. Keep the affected person warm and at rest. Get immediate medical attention. EYE CONTACT: Hold eyelids apart and flush with plenty of water for at least 15 minutes. Get immediate medical attention. SKIN CONTACT: Promptly wash contaminated skins with soap or mild detergent and water. Remove clothing if soaked and wash as above. Get medical attention if irritation develops or persists. INGESTION: NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUID! Promptly let affected person drink lots of water to dilute the swallowed chemical. DO NOT induce vomiting. Get immediate medical attention.   SECTION 5 FIRE FIGHTING MEASURES FLASHPOINT AND METHOD: 88 deg. F Tag Closed Cup FLAMMABLE LIMITS: LEL: 2.0% by weight @ 77 deg F (Alcohol) UEL: 11.0% by weight @ 77 deg F (Alcohol) GENERAL HAZARD: May explode when heated or when exposed to flames or sparks. Solvent vapors may form explosive mixtures with air. Vapors may travel considerable distance to source of ignition and flash back. In a fire, hazardous decomposition products such as smoke, carbon monoxide, carbon dioxide and oxides of nitrogen, and possibly toxic hydrocarbons may be formed. FIRE FIGHTING INSTRUCTIONS: Keep run-off water out of sewers and watercourses. Dikes for water control. If water pollution occurs notify appropriate authorities. Use water SPRAY only to cool containers! Do not put water on leaked material. Move container from fire area if it can be done without risk. As in any fire, wear self-contained breathing apparatus (pressure demand, MSHA/NIOSH approved or equivalent) and full protective gear. FIRE FIGHTING EQUIPMENT: As in any fire, wear self-contained breathing apparatus (pressure demand, MSHA/NIOSH approved or equivalent) and full protective gear. "alcohol foam", carbon dioxide, (CO2, dry chemicals, sand, water spray, fog or mist). HAZARDOUS COMBUSTION PRODUCTS: SECTION 6 ACCIDENTAL RELEASE MEASURES LAND SPILL: Extinguish all sources of ignition. Avoid sparks, flames, heat and smoking. Provide ventilation and confine spill. Do not allow run off to drains. Clean-up personnel should use respiratory and/or liquid contact protection. Wash thoroughly after dealing with spill.       WATER SPILL: Absorb liquid on paper towel or other dry material and transfer to an extractor hood. Let vapors evaporate. Dispose as flammable waste. Confine spillage and absorb with dry, non-combustible, absorbent materials and sweep up into suitable sealable container for disposal. Prevent the spillage from entering drains, as potential explosion hazard will be created. If entry occurs inform local authorities particularly the, Fire Service.                   SECTION 7 HANDLING AND STORAGE   STORAGE TEMPERATURE: Vapors are heavier than air and may spread along floors to form explosive mixtures with air. Ventilate well to prevent the creation of flammable or explosive concentrations of vapor in air and to avoid vapor concentrations higher than the permissible exposure limits. Highest vapor levels occur typically during printer cleaning operations. Avoid spilling, skin and eye contact. Avoid inhalation of vapor and spray mist. Smoking, eating and drinking should be prohibited in areas of storage and use. Good housekeeping standards and regular safe removal of waste materials will minimize risks of spontaneous combustion and other fire risks. As dried ink is highly flammable, do not allow it to accumulate on, or around, the printer. Containers of this product may be hazardous when emptied. Since emptied containers retain product residues (vapors, liquids, solids), all hazard precautions mentioned in this data sheet must be observed when handling emptied containers. STORAGE PRESSURE: FLAMMABLE LIQUID! Store in a cool, dry, well ventilated area, away from incompatible materials (see section 10) and in tightly closed containers. Avoid exposure to direct sunlight, sources of ignition and a build up of static electricity. The storage and use of highly flammable liquid is subject to regulation; consult your company safety officer or you’re local authority for guidance. GENERAL: Flammable liquid storage       SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION   ENGINEERING CONTROLS VENTILATION: Provide adequate general and local exhaust ventilation to maintain vapor concentrations well within the PEL/TLV's. PERSONAL PROTECTION RESPIRATOR: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirator's use. PROTECTIVE CLOTHING: The gloves listed below may provide protection against permeation. Rubber (natural, latex), polyvinyl acetate (PVA), P.T.F.E. SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES VAPOR PRESSURE: No data VAPOR DENSITY: Heavier than air SPECIFIC GRAVITY: 0.9 at 68 deg. F PHYSICAL STATE: No data SOLUBILITY IN WATER: Soluble in organic solvents (most), insoluble in water EVAPORATION RATE: 60 pH: No data BOILING POINT: 302 deg F (Alcohol) FREEZING POINT: No data VISCOSITY: appx. 10-12 cps ODOR: Characteristic alcohol APPEARANCE: Mobile liquid SECTION 10 STABILITY AND REACTIVITY GENERAL: Normally stable. Avoid heat, sparks, flames, moisture and light. INCOMPATIBLE MATERIALS AND CONDITIONS TO AVOID: Strong oxidizing agents. Amines. Strong acids HAZARDOUS DECOMPOSITION: In a fire, hazardous decomposition products such as smoke, carbon monoxide, carbon dioxide and oxides of nitrogen, and possibly toxic hydrocarbons may be formed.           SECTION 11 TOXICOLOGICAL INFORMATION   There is no data available on the product itself. Exposure to organic solvent vapors may result in adverse health effects such as irritation of the mucous membrane and the respiratory system and adverse effects on the renal and central nervous systems. Symptoms include headache, dizziness, fatigue, muscular weakness, drowsiness and in extreme cases, loss of consciousness. Repeated or prolonged contact with the product may lead to removal of natural fats from the skin resulting in non-allergenic contact dermatitis and absorption through the skin. Splashes in the eyes may cause irritation and reversible local damage.   SECTION 12 ECOLOGICAL INFORMATION No Data Available   SECTION 13 DISPOSAL CONSIDERATIONS DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL, STATE AND FEDERAL REGULATIONS.   SECTION 14 TRANSPORT INFORMATION DOT (Department Of Transportation) PROPER SHIPPING NAME: Printing Ink, flammable UN/NA NUMBER: 1210 HAZARD CLASS: 3 PACKING GROUP: II EMERGENCY PHONE - 24 HOURS: CALL CHEM-TEL, INC. (800) 255-3924     SECTION 15 REGULATORY INFORMATION OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200) TSCA: Components of this product are listed on the Toxic Substance Control Act (TSCA) Inventory. SECTION 313: This product contains the following substances subject to reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR 372: INGREDIENT: 2-METHOXYETHANOL CAS No.: 109-86-4 %Wt.: <15 CONEG: No intentional addition of Lead, Cadmium, Mercury, or Hexavalent Chromium has been made to this product. To the best knowledge, the total incidental amount of the four metals listed above does not exceed 100 ppm. SECTION 16 OTHER INFORMATION SPECIFIC NOTES: None REVISION DATE: 06 June 1996 REPLACES ISSUE DATE: New Issue REVISION SUMMARY: Format changed to ANSI Z400.1 standard DISCLAIMER THIS INFORMATION RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY PROCESS. SUCH INFORMATION IS, TO THE BEST OF DIGITAL DESIGN’S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS OF THE DATE INDICATED. HOWEVER, NO WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR COMPLETENESS. IT IS THE USER’S RESPONSIBILITY TO SATISFY HIMSELF AS TO THE SUITABILITY OF SUCH INFORMATION FOR HIS OWN PARTICULAR USE.